net.grelf.grip
Class ImageDouble

java.lang.Object
  net.grelf.grip.ImageBase
      net.grelf.grip.ImageDouble

All Implemented Interfaces:

java.lang.Cloneable, Image

Direct Known Subclasses:

AccumulatorDouble

public class ImageDouble
extends ImageBase
implements Image, java.lang.Cloneable

This is used as an alternative to BufferedImage for holding 64-bits-per-channel (floating point) images. It needs a lot of memory of course: width x height x (12 + 8n) bytes for n-channel images.
Its behaviour differs from BufferedImages in that the maximum level available is not automatically increased to 2 to the power 32. A 16-bit BufferedImage would always be considered to have a maximum level of 65535 but the maximum level of an Accumulator is the maximum level actually reached in the data (across all channels). The range of values held must be updated by every operation that modifies the data, so it is then available as getRangeDouble () without rescanning the image. A rescan can always be done, by getOverallRangeDouble () or getChannelRangesDouble (), but that can be time consuming.

Whereas a BufferedImage would be processed by static methods in class ImProcess, ImageDoubles have all such methods as instance methods.

The data can be saved on disc and reloaded in FITS format.

Field Summary

protected double[][]

data

Constructor Summary

ImageDouble(java.awt.image.BufferedImage bim)
Use the BufferedImage to set the width, height and number of bands (channels) in this Image.

ImageDouble(int width, int height, int nBands)
Creates image without setting any pixels.

ImageDouble(int width, int height, int nBands, boolean fillWithZeroes)
Creates image with pixels optionally set to zero.

Method Summary

void	add(java.awt.image.BufferedImage bim) Add pixel values from bim into the image data array.
void	add(java.awt.image.BufferedImage bim, double dx, double dy) Add pixel values from bim into the image data array, offset by vector (dx, dy).
void	add(java.awt.image.BufferedImage bim, int dx, int dy) Add pixel values from bim into the image data array, offset by vector (dx, dy).
void	add(double offset) Offset all pixel values by the given amount.
void	add(Image other) Add pixel values from the other Image into the current data array.
void	add(ImageDouble other) Add pixel values from another Image into the data array.
void	add(ImageDouble other, double f1, double f2) Add pixel values from another Image into the data array, taking fraction f1 of the values in the current Image and f2 of those in the other.
void	applyCurve(RangeInt currentRange, java.util.List<java.awt.Point> points, java.awt.image.BufferedImage bim) Apply a look-up curve to transform Image pixels into BufferedImage pixels.
void	applyCurveDouble(java.util.List<java.awt.Point> points) Apply a look-up curve to this ImageDouble.
void	applyCurveDouble(RangeDouble currentRange, java.util.List<java.awt.Point> points, java.awt.image.BufferedImage bim) Apply a look-up curve to transform Image pixels into BufferedImage pixels.
void	applyCurveDouble(RangeDouble currentRange, java.util.List<java.awt.Point> points, ImageInt dstAccum) Apply a look-up curve to transform ImageDouble pixels into ImageInt pixels.
void	autoCrop() Automatically remove any rectangular margin of black (0, 0, 0) pixels from the image, thereby cropping it.
void	autoStretch(boolean allChannelsSame) Stretch the contrast in the image so the full range of levels is used.
void	autoStretch(boolean allChannelsSame, java.awt.Point topLeft, java.awt.Point bottomRight) Stretch the contrast in the image so the full range of levels is used.
byte[][]	autoThreshold() Threshold automatically.
void	averageVertically() Replace every pixel of every vertical line in the image by the average of the levels along the line.
void	averageVertically(int yMin, int yMax) Replace every pixel of every vertical line in the image by the average of the levels along the line, within two y coordinate limits.
protected void	checkCompatibility(java.awt.image.BufferedImage bim)
Image	clone()
ImageInt	convertToImageInt(boolean interactively) Interact via ImCurveDialogue or scale linearly to create an ImageInt.
void	convertToMonochrome() Reduce the number of bands from 3 to 1, converting RGB to monochrome, using 0.325 x red + 0.5 * green + 0.175 * blue.
void	convertToMonochrome(double... f) Reduce the number of bands to 1, combining channels, using sum_i (f[i]/I x px[i]), where I = sum_i (f[i]).
void	crop(java.awt.Point pt1, java.awt.Point pt2) Crop the accumulator by a rectangle defined by the diagonally opposite points.
void	divide(int n) Divide all pixel values (in all bands) in the accumulator by n.
void	drawImage(java.awt.image.BufferedImage bim) Convert the accumulator data into a BufferedImage, by drawing them into the image displayed in an ImFrame.
void	fit(int width, int height) Scale the image so it fits into the given width and height (in pixels), without changing its proportions.
void	flipHorizontal() Flip the image horizontally.
void	flipVertical() Flip the image vertically.
int	getBitsPerChannel() Get the number of bits per channel; currently always returns 64.
RangeInt[]	getChannelRanges() Find the range of values in each channel, as pairs of int values - NB: MAY OVERFLOW.
RangeDouble[]	getChannelRangesDouble() Find the range of values in each channel, as pairs of double values.
int	getHeight() Get the height, in pixels, of the image.
double[]	getHorizontalSamplesDouble(int x0, int y, int band, int n)
Metadata	getMetadata() Get metadata associated with the image.
int	getNBands() Get the number of bands (channels) in the image.
RangeInt	getOverallRange() Get overall range of values across all channels, as a pair of int values - NB: MAY OVERFLOW.
RangeDouble	getOverallRangeDouble() Get overall range of values across all channels, as a pair of double values
int[]	getPixel(int x, int y) Get array of int pixel values for all bands at the given integer (x, y) position.
double[]	getPixelDouble(int x, int y) Get array of double pixel values for all bands at the given integer (x, y) position.
double[]	getPixelDoubleInterpolated(double x, double y) Get array of double pixel values for all bands at the given fractional (x, y) position.
int[]	getPixelInterpolated(double x, double y) Get array of int pixel values for all bands at the given fractional (x, y) position.
RangeInt	getRange() Get the minimum and maximum values occurring, across all channels.
RangeDouble	getRangeDouble() Get the minimum and maximum values occurring, across all channels.
double[]	getVerticalSamplesDouble(int x, int y0, int band, int n)
int	getWidth() Get the width, in pixels, of the image.
Image	gnomonicProjection(int focalLength) Project from sphere to plane.
Image	inverseGnomonicProjection(int focalLength) Project from plane to sphere.
void	invert() Invert the colour at every pixel in the image.
void	meanFilter(int halfWidth, javax.swing.ProgressMonitor monitor) Replace every pixel in the image by the mean value of its n x n neighbourhood, where n = 2.halfWidth + 1.
void	medianFilter(int halfWidth, javax.swing.ProgressMonitor monitor) Replace every pixel in the image by the median value of its n x n neighbourhood, where n = 2.halfWidth + 1.
void	multiply(double f) Multiply all pixel values (in all bands) in the accumulator by factor f, truncating the result if pixels contain integer values.
void	multiply(ImageDouble other)
void	multiply(ImageDouble other, double f1, double f2) Multiply fraction f1 of this accumulator by f2 of the other.
void	nearestExtremeFilter(int halfWidth, javax.swing.ProgressMonitor monitor) Replace every pixel in the image by the nearest of the max and min of its n x n neighbourhood, where n = 2.halfWidth + 1.
void	neutraliseBackground() Equate the histogram modes of all channels by stretching from the overall maximum value.
void	rankFilter(int halfWidth, javax.swing.ProgressMonitor monitor) Replace every pixel in the image by its rank in its n x n neighbourhood, where n = 2.halfWidth + 1.
void	reapplyColour(Image intensityAcc, Image colourAcc) For combining a monochrome intensity image with a multi-band colour information image, the 2 images having been created by ImProcess.splitIntensity ().
Image	rotate(double angleDegs) Rotate the image anticlockwise by the given angle (in degrees).
void	save(java.lang.String filePath) Save on disc: slower version, has to work out the range of values occurring in the accumulator.
void	save(java.lang.String filePath, RangeDouble range) Save on disc: faster version if the range of values occurring in the accumulator is already known.
void	save(java.lang.String filePath, RangeInt range) Save on disc: faster version if the range of values occurring in the accumulator is already known.
void	saveAsFITS(java.lang.String filePath)
Image	scale(double factor, boolean interpolating) Scale the image in x and y by the given factor
void	scale(RangeDouble[] currentChannelRanges, java.awt.image.BufferedImage bim) Deprecated.
void	scale(RangeDouble[] currentChannelRanges, RangeDouble[] targetChannelRanges) Deprecated.
void	scale(RangeInt[] currentChannelRanges, java.awt.image.BufferedImage bim) Deprecated.
void	scale(RangeInt[] currentChannelRanges, RangeInt[] targetChannelRanges) Deprecated.
void	set(java.awt.image.BufferedImage bim) Set pixel values from bim into the accumulator array.
void	setMetadata(Metadata theData) Associate metadata with the image.
void	setPixel(int x, int y, int[] px) Does nothing if (x, y) is outside the image.
void	setPixel(int x, int y, int band, int px) Set value into a single band of a pixel without changing the other bands.
void	setPixelDouble(int x, int y, double[] px) Does nothing if (x, y) is outside the image.
void	setPixelDouble(int x, int y, int band, double px) Set value into a single band of a pixel without changing the other bands.
protected void	setRangeDouble(RangeDouble range)
Image[]	splitChannels() Convert image to any array of monochrome images.
void	subtract(java.awt.image.BufferedImage bim) Subtract pixel values of bim from the accumulator array.
void	subtract(ImageDouble other) Subtract other from this, pixel by pixel, the result being about the half-way brightness level so that both negative and positive results can be seen.
void	subtractToZero(ImageDouble other) Subtract other from this, pixel by pixel, negative results being cut off at zero.
byte[][]	threshold(Threshold thresh) Threshold the image to detect pixels in the range(s) specified by the given threshold.
java.lang.String	toString() Get a simple description : width x height x channels
Image	translate(int dx, int dy) Displace the image content by the given offset vector.
void	varianceFilter(int halfWidth, javax.swing.ProgressMonitor monitor) Replace every pixel in the image by the variance of its n x n neighbourhood, where n = 2.halfWidth + 1.

Methods inherited from class net.grelf.grip.ImageBase

padTo, padTo, rJustified20

Methods inherited from class java.lang.Object

equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Detail

data

protected double[][] data

Constructor Detail

ImageDouble

public ImageDouble(int width,
                   int height,
                   int nBands)

Creates image without setting any pixels.

ImageDouble

public ImageDouble(int width,
                   int height,
                   int nBands,
                   boolean fillWithZeroes)

Creates image with pixels optionally set to zero.

ImageDouble

public ImageDouble(java.awt.image.BufferedImage bim)
            throws IncompatibleImageException

Use the BufferedImage to set the width, height and number of bands (channels) in this Image. Populate the pixel values in the image data array from the BufferedImage also.

Throws:

IncompatibleImageException

Method Detail

getWidth

public int getWidth()

Get the width, in pixels, of the image.

Specified by:

getWidth in interface Image

getHeight

public int getHeight()

Get the height, in pixels, of the image.

Specified by:

getHeight in interface Image

getNBands

public int getNBands()

Get the number of bands (channels) in the image.

Specified by:

getNBands in interface Image

getBitsPerChannel

public int getBitsPerChannel()

Get the number of bits per channel; currently always returns 64.

Specified by:

getBitsPerChannel in interface Image

getMetadata

public Metadata getMetadata()

Get metadata associated with the image. Null if none.

Specified by:

getMetadata in interface Image

setMetadata

public void setMetadata(Metadata theData)

Associate metadata with the image.

Specified by:

setMetadata in interface Image

getRange

public RangeInt getRange()

Get the minimum and maximum values occurring, across all channels. May not make sense due to casting to int.

Specified by:

getRange in interface Image

getRangeDouble

public RangeDouble getRangeDouble()

Get the minimum and maximum values occurring, across all channels.

Specified by:

getRangeDouble in interface Image

setRangeDouble

protected void setRangeDouble(RangeDouble range)

checkCompatibility

protected void checkCompatibility(java.awt.image.BufferedImage bim)
                           throws IncompatibleImageException

Throws:

IncompatibleImageException

add

public void add(double offset)

Offset all pixel values by the given amount. This will be necessary before obtaining a histogram if the range is found to have a negative low value.

add

public void add(Image other)
         throws IncompatibleImageException

Description copied from interface: Image

Add pixel values from the other Image into the current data array. If other is larger than the data then the rectangle starting at the top left corner of other which overlaps the data will be used.

Specified by:

add in interface Image

Throws:

IncompatibleImageException

add

public void add(ImageDouble other)
         throws IncompatibleImageException

Add pixel values from another Image into the data array. If the other Image is larger than this one then the rectangle starting at the top left corner which overlaps will be used.

Throws:

IncompatibleImageException

add

public void add(ImageDouble other,
                double f1,
                double f2)
         throws IncompatibleImageException

Add pixel values from another Image into the data array, taking fraction f1 of the values in the current Image and f2 of those in the other. If the other Image is larger than this one then the rectangle starting at the top left corner which overlaps will be used.

Throws:

IncompatibleImageException

add

public void add(java.awt.image.BufferedImage bim)
         throws IncompatibleImageException

Add pixel values from bim into the image data array. If bim is larger than this Image then the rectangle starting at the top left corner of bim which overlaps the Image will be used.

Specified by:

add in interface Image

Throws:

IncompatibleImageException

add

public void add(java.awt.image.BufferedImage bim,
                int dx,
                int dy)
         throws IncompatibleImageException

Add pixel values from bim into the image data array, offset by vector (dx, dy). Only those pixels of the offset bim which overlap this Image are used. Using integer coordinates, this version is fast but does not interpolate from the source image.
10.10.22: Major bug fixed.

Specified by:

add in interface Image

Throws:

IncompatibleImageException

add

public void add(java.awt.image.BufferedImage bim,
                double dx,
                double dy)
         throws IncompatibleImageException

Add pixel values from bim into the image data array, offset by vector (dx, dy). Only those pixels of the offset bim which overlap this Image are used. Using double coordinates, this version is slower but does interpolate from the source image.
10.10.22: Major bug fixed.

Specified by:

add in interface Image

Throws:

IncompatibleImageException

applyCurve

public void applyCurve(RangeInt currentRange,
                       java.util.List<java.awt.Point> points,
                       java.awt.image.BufferedImage bim)
                throws IncompatibleImageException

Apply a look-up curve to transform Image pixels into BufferedImage pixels. The curve is a set of points with x and y ranges of 0..255 but the Image (x-axis) has 32-bit range and the target BufferedImage (y-axis) may have any number of bits per channel. The Image and BufefredImage must have the same number of channels, otherwise an IncompatibleImageException is thrown.

Specified by:

applyCurve in interface Image

Throws:

IncompatibleImageException

applyCurveDouble

public void applyCurveDouble(RangeDouble currentRange,
                             java.util.List<java.awt.Point> points,
                             java.awt.image.BufferedImage bim)
                      throws IncompatibleImageException

Apply a look-up curve to transform Image pixels into BufferedImage pixels. The curve is a set of points with x and y ranges of 0..255 but this Image (x-axis) has 32-bit range and the target BufferedImage (y-axis) may have any number of bits per channel. The Image and BufferedImage must have the same number of channels, otherwise an IncompatibleImageException is thrown.

Throws:

IncompatibleImageException

applyCurveDouble

public void applyCurveDouble(RangeDouble currentRange,
                             java.util.List<java.awt.Point> points,
                             ImageInt dstAccum)
                      throws IncompatibleImageException

Apply a look-up curve to transform ImageDouble pixels into ImageInt pixels. The curve is a set of points with x and y ranges of 0..255 but the accumulator axes have much wider ranges. The source and destination accumulators and image must have the same number of channels, otherwise an IncompatibleImageException is thrown.

Throws:

IncompatibleImageException

applyCurveDouble

public void applyCurveDouble(java.util.List<java.awt.Point> points)

Apply a look-up curve to this ImageDouble. The curve is a set of points with x and y ranges of 0..255 but the accumulator axes have much wider ranges.

autoCrop

public void autoCrop()

Automatically remove any rectangular margin of black (0, 0, 0) pixels from the image, thereby cropping it. Potentially replaces the data array inside this Image by a new smaller one.

Specified by:

autoCrop in interface Image

autoStretch

public void autoStretch(boolean allChannelsSame)

Stretch the contrast in the image so the full range of levels is used.

Specified by:

autoStretch in interface Image

autoStretch

public void autoStretch(boolean allChannelsSame,
                        java.awt.Point topLeft,
                        java.awt.Point bottomRight)

Stretch the contrast in the image so the full range of levels is used. This version only changes pixels in the rectangle defined by the two points as diagonal. The upper level of the data will not change but if the lower level was not zero a linear rescaling will make it so.

Specified by:

autoStretch in interface Image

autoThreshold

public byte[][] autoThreshold()

Threshold automatically. First gets a histogram and finds the channel means. Sets the threshold for each channel: if the mean is lower than half-way up the brightness range the background is assumed to be dark so the threshold goes from half-way up to the top. Otherwise the background is assumed to be bright so the threshold goes from 0 to half-way. Then does the thresholding to set a mask in the GlassPane, suitable for blob detection.
Not for segmenting stars: use StarSegmenter class instead.

Specified by:

autoThreshold in interface Image

averageVertically

public void averageVertically()

Replace every pixel of every vertical line in the image by the average of the levels along the line. This is for analysing profiles (particularly for spectroscopy). Rotate and crop the image appropriately before using this.

Specified by:

averageVertically in interface Image

averageVertically

public void averageVertically(int yMin,
                              int yMax)

Replace every pixel of every vertical line in the image by the average of the levels along the line, within two y coordinate limits. This is for analysing profiles (particularly for spectroscopy). Rotate and crop the image appropriately before using this.

Specified by:

averageVertically in interface Image

clone

public Image clone()

Specified by:

clone in interface Image

Overrides:

clone in class java.lang.Object

convertToImageInt

public ImageInt convertToImageInt(boolean interactively)

Interact via ImCurveDialogue or scale linearly to create an ImageInt.

convertToMonochrome

public void convertToMonochrome()

Reduce the number of bands from 3 to 1, converting RGB to monochrome, using 0.325 x red + 0.5 * green + 0.175 * blue. Replaces the data array inside this accumulator by a new smaller one.

Specified by:

convertToMonochrome in interface Image

convertToMonochrome

public void convertToMonochrome(double... f)

Reduce the number of bands to 1, combining channels, using sum_i (f[i]/I x px[i]), where I = sum_i (f[i]). Replaces the data array inside this accumulator by a new smaller one.

Specified by:

convertToMonochrome in interface Image

crop

public void crop(java.awt.Point pt1,
                 java.awt.Point pt2)

Crop the accumulator by a rectangle defined by the diagonally opposite points. Does not assume pt1 is above or to the left of pt2. Replaces the data array inside this accumulator by a new smaller one.

Specified by:

crop in interface Image

divide

public void divide(int n)

Divide all pixel values (in all bands) in the accumulator by n.

Specified by:

divide in interface Image

drawImage

public void drawImage(java.awt.image.BufferedImage bim)

Convert the accumulator data into a BufferedImage, by drawing them into the image displayed in an ImFrame. This does not throw an exception if the accumulator is not the same size as the ImFrame, on the grounds that the user will see the result. Assumes that the bit depth of the BufferedImage is enough to hold the maximum value in the Accumulator. If that is not the case pixels will overflow, so consider using ImCurveDialogue.askCurve (imf, accum) instead, to allow the user to scale the data into the required range. 11.10.23: Changed parameter from ImFrame to BufferedImage, to reduce dependencies.

Specified by:

drawImage in interface Image

fit

public void fit(int width,
                int height)

Scale the image so it fits into the given width and height (in pixels), without changing its proportions. Replaces the data array inside this accumulator by a new smaller one.

Specified by:

fit in interface Image

flipHorizontal

public void flipHorizontal()

Flip the image horizontally.

Specified by:

flipHorizontal in interface Image

flipVertical

public void flipVertical()

Flip the image vertically.

Specified by:

flipVertical in interface Image

getChannelRanges

public RangeInt[] getChannelRanges()

Find the range of values in each channel, as pairs of int values - NB: MAY OVERFLOW.

Specified by:

getChannelRanges in interface Image

getChannelRangesDouble

public RangeDouble[] getChannelRangesDouble()

Find the range of values in each channel, as pairs of double values.

Specified by:

getChannelRangesDouble in interface Image

getOverallRange

public RangeInt getOverallRange()

Get overall range of values across all channels, as a pair of int values - NB: MAY OVERFLOW.

Specified by:

getOverallRange in interface Image

getOverallRangeDouble

public RangeDouble getOverallRangeDouble()

Get overall range of values across all channels, as a pair of double values

Specified by:

getOverallRangeDouble in interface Image

getPixel

public int[] getPixel(int x,
                      int y)

Get array of int pixel values for all bands at the given integer (x, y) position. Returns all zeroes if the position is outside the accumulator array. NB: MAY OVERFLOW.

Specified by:

getPixel in interface Image

getPixelDouble

public double[] getPixelDouble(int x,
                               int y)

Get array of double pixel values for all bands at the given integer (x, y) position. Returns all zeroes if the position is outside the accumulator array.

Specified by:

getPixelDouble in interface Image

getPixelInterpolated

public int[] getPixelInterpolated(double x,
                                  double y)

Get array of int pixel values for all bands at the given fractional (x, y) position. Returns all zeroes if the position is outside the accumulator array. NB: MAY OVERFLOW.

Specified by:

getPixelInterpolated in interface Image

getPixelDoubleInterpolated

public double[] getPixelDoubleInterpolated(double x,
                                           double y)

Get array of double pixel values for all bands at the given fractional (x, y) position. Returns all zeroes if the position is outside the accumulator array.

Specified by:

getPixelDoubleInterpolated in interface Image

getHorizontalSamplesDouble

public double[] getHorizontalSamplesDouble(int x0,
                                           int y,
                                           int band,
                                           int n)

getVerticalSamplesDouble

public double[] getVerticalSamplesDouble(int x,
                                         int y0,
                                         int band,
                                         int n)

gnomonicProjection

public Image gnomonicProjection(int focalLength)

Project from sphere to plane.

Specified by:

gnomonicProjection in interface Image

inverseGnomonicProjection

public Image inverseGnomonicProjection(int focalLength)

Project from plane to sphere.

Specified by:

inverseGnomonicProjection in interface Image

invert

public void invert()

Invert the colour at every pixel in the image.

Specified by:

invert in interface Image

meanFilter

public void meanFilter(int halfWidth,
                       javax.swing.ProgressMonitor monitor)

Replace every pixel in the image by the mean value of its n x n neighbourhood, where n = 2.halfWidth + 1.

Specified by:

meanFilter in interface Image

medianFilter

public void medianFilter(int halfWidth,
                         javax.swing.ProgressMonitor monitor)

Replace every pixel in the image by the median value of its n x n neighbourhood, where n = 2.halfWidth + 1.

Specified by:

medianFilter in interface Image

multiply

public void multiply(double f)

Multiply all pixel values (in all bands) in the accumulator by factor f, truncating the result if pixels contain integer values.

Specified by:

multiply in interface Image

multiply

public void multiply(ImageDouble other)

multiply

public void multiply(ImageDouble other,
                     double f1,
                     double f2)

Multiply fraction f1 of this accumulator by f2 of the other.

nearestExtremeFilter

public void nearestExtremeFilter(int halfWidth,
                                 javax.swing.ProgressMonitor monitor)

Replace every pixel in the image by the nearest of the max and min of its n x n neighbourhood, where n = 2.halfWidth + 1.

Specified by:

nearestExtremeFilter in interface Image

neutraliseBackground

public void neutraliseBackground()

Description copied from interface: Image

Equate the histogram modes of all channels by stretching from the overall maximum value.

Specified by:

neutraliseBackground in interface Image

rankFilter

public void rankFilter(int halfWidth,
                       javax.swing.ProgressMonitor monitor)

Replace every pixel in the image by its rank in its n x n neighbourhood, where n = 2.halfWidth + 1. The rank is scaled up so that its possible values span the grey level range of the image. Each channel is treated independently.

Specified by:

rankFilter in interface Image

reapplyColour

public void reapplyColour(Image intensityAcc,
                          Image colourAcc)

For combining a monochrome intensity image with a multi-band colour information image, the 2 images having been created by ImProcess.splitIntensity (). The result fills the current Accumulator, overwriting any previous contents. This enables GRIP to implement the colour preservation scheme described at http://www.allthesky.com/articles/colorpreserve.html

Specified by:

reapplyColour in interface Image

rotate

public Image rotate(double angleDegs)

Rotate the image anticlockwise by the given angle (in degrees).

Specified by:

rotate in interface Image

save

public void save(java.lang.String filePath)

Save on disc: slower version, has to work out the range of values occurring in the accumulator.

Specified by:

save in interface Image

save

public void save(java.lang.String filePath,
                 RangeInt range)

Save on disc: faster version if the range of values occurring in the accumulator is already known.

Specified by:

save in interface Image

save

public void save(java.lang.String filePath,
                 RangeDouble range)

Save on disc: faster version if the range of values occurring in the accumulator is already known.

Specified by:

save in interface Image

saveAsFITS

public void saveAsFITS(java.lang.String filePath)

Specified by:

saveAsFITS in interface Image

scale

public Image scale(double factor,
                   boolean interpolating)

Scale the image in x and y by the given factor

Specified by:

scale in interface Image

scale

@Deprecated
public void scale(RangeInt[] currentChannelRanges,
                             RangeInt[] targetChannelRanges)

Deprecated.

Offset and scale all values to fit in the given target ranges. Both input arrays must have the same number of dimensions, equal to the number of channels.

Specified by:

scale in interface Image

scale

@Deprecated
public void scale(RangeInt[] currentChannelRanges,
                             java.awt.image.BufferedImage bim)
           throws IncompatibleImageException

Deprecated.

Offset and scale all values to fit into the supplied image. The input array must have the same number of dimensions as the number of channels. The image must have the same number of channels as the accumulator, otherwise an IncompatibleImageException is thrown.

Specified by:

scale in interface Image

Throws:

IncompatibleImageException

scale

@Deprecated
public void scale(RangeDouble[] currentChannelRanges,
                             RangeDouble[] targetChannelRanges)

Deprecated.

Offset and scale all values to fit in the given target ranges. Both input arrays must have the same number of dimensions, equal to the number of channels.

Specified by:

scale in interface Image

scale

@Deprecated
public void scale(RangeDouble[] currentChannelRanges,
                             java.awt.image.BufferedImage bim)
           throws IncompatibleImageException

Deprecated.

Offset and scale all values to fit into the supplied image. The input array must have the same number of dimensions as the number of channels. The image must have the same number of channels as the accumulator, otherwise an IncompatibleImageException is thrown.

Specified by:

scale in interface Image

Throws:

IncompatibleImageException

set

public final void set(java.awt.image.BufferedImage bim)
               throws IncompatibleImageException

Set pixel values from bim into the accumulator array. If bim is larger than the accummulator then the rectangle starting at the top left corner of bim which overlaps the accumulator will be used.

Specified by:

set in interface Image

Throws:

IncompatibleImageException

setPixel

public void setPixel(int x,
                     int y,
                     int[] px)

Does nothing if (x, y) is outside the image.

Specified by:

setPixel in interface Image

setPixel

public void setPixel(int x,
                     int y,
                     int band,
                     int px)

Set value into a single band of a pixel without changing the other bands. Does nothing if (x, y) is outside the image.

Specified by:

setPixel in interface Image

setPixelDouble

public void setPixelDouble(int x,
                           int y,
                           double[] px)

Does nothing if (x, y) is outside the image.

Specified by:

setPixelDouble in interface Image

setPixelDouble

public void setPixelDouble(int x,
                           int y,
                           int band,
                           double px)

Set value into a single band of a pixel without changing the other bands. Does nothing if (x, y) is outside the image.

Specified by:

setPixelDouble in interface Image

splitChannels

public Image[] splitChannels()

Convert image to any array of monochrome images. 11.10.23: ImFrame parameter removed and return type added, to reduce dependencies.

Specified by:

splitChannels in interface Image

subtract

public void subtract(ImageDouble other)

Subtract other from this, pixel by pixel, the result being about the half-way brightness level so that both negative and positive results can be seen.

subtract

public void subtract(java.awt.image.BufferedImage bim)
              throws IncompatibleImageException

Subtract pixel values of bim from the accumulator array. If bim is larger than the accumulator then the rectangle starting at the top left corner of bim which overlaps the accumulator will be used.

Specified by:

subtract in interface Image

Throws:

IncompatibleImageException

subtractToZero

public void subtractToZero(ImageDouble other)

Subtract other from this, pixel by pixel, negative results being cut off at zero.

threshold

public byte[][] threshold(Threshold thresh)

Threshold the image to detect pixels in the range(s) specified by the given threshold. Return a binary mask (values BlobMask.MASK_CLEAR or BlobMask.MASK_SET), suitable for setting into GlassPane. The image may have any number of bands.

Specified by:

threshold in interface Image

toString

public java.lang.String toString()

Get a simple description : width x height x channels

Specified by:

toString in interface Image

Overrides:

toString in class java.lang.Object

translate

public Image translate(int dx,
                       int dy)

Displace the image content by the given offset vector. Image size is unchanged. Margins exposed by the shift are filled with zeroes. Portions of the image shifted off the edge are lost. Shifting an image by a very small amount and then subtracting it from itself (eg, as previously cloned from the image menu) is a way of detecting edges in the direction of the offset.

Specified by:

translate in interface Image

varianceFilter

public void varianceFilter(int halfWidth,
                           javax.swing.ProgressMonitor monitor)

Replace every pixel in the image by the variance of its n x n neighbourhood, where n = 2.halfWidth + 1.

Specified by:

varianceFilter in interface Image